Static Test 66

Quick Links
Home
Propellants
Rocket Motors
Rockets
Rocket Electronics
Ground Suport
Launch & Static Tests
Software
Links
E-Mail Scott
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The casting information is excerpted from the Xylitol Page:

XL-9: 65% granular KNO3, 24% granular Xylitol, 11% powdered Sucrose

For this batch I cut back the sugar to 11%, it was mixed the same as previous batches. The dry powder melted quickly, I stirred and monitored the temperature. At 225(F) I turned off the heat. If the sugar indeed is disolving in the melted xylitol, there is no reason for further heating. It will be interesting to see how the cured grain is affected by the reduced heat. I also used granular KNO3 and xlyitol in this batch. I don't think the xlylitol matters what form it is in, but the granular KNO3 results in a much more pourable melted propellant, the slight loss of Isp may well be offset by better density of the less viscous molten propellant.

Here is the grain numbers:

1) 2.73" at 116.0 grams

2) 2.955" at 128.3 grams

3) 2.86" at 126.3 grams

4) 2.975" at 131.6 grams

Total Propellant Weight: 498.2 grams, 1.09834 pounds

Total Grain Length: 11.52"

Density: 0.0656 lb/ci

Kn: 249 initial 289 maximum

Burn Time: 1.566 seconds (A lot of late low level thrust)

Peak Thrust: 204.6 pounds

Maximum Estimated Pressure: ~1,050 psi

Total Impulse: 129.94 pound seconds

Isp: 118